Cisco Catalyst 2960-X and 2960-XR Series Switches Data Sheet
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). They operate on Cisco IOS® Software and support simple device management as well as network management. The Cisco Catalyst 2960-X and 2960-XR Series provide easy device onboarding, configuration, monitoring, and troubleshooting. These fully managed switches can provide advanced Layer 2 and Layer 3 features as well as optional Power over Ethernet Plus (PoE+) power. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure, and energy-efficient business operations with intelligent services. The switches deliver enhanced application visibility, network reliability, and network resiliency
Product Highlights
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
● PoE+ support with a power budget of up to 740W and Perpetual PoE
● Cisco IOS LAN Base or LAN Lite1 and Cisco IOS IP Lite
● Device management with web UI, over-the-air access via Bluetooth, Command-Line Interface (CLI), Simple Network Management Protocol (SNMP), and RJ-45 or USB console access
● Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
● Stacking with FlexStack-Plus and FlexStack-Extended
● Layer 3 features with routed access (Open Shortest Path First [OSPF]), static routing, and Routing Information Protocol (RIP)
● Visibility with Domain Name System as an Authoritative Source (DNS-AS) and Full (Flexible) NetFlow
● Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard
● Reliability with higher Mean Time Between Failures (MTBF) and Enhanced Limited Lifetime Warranty
WS-C2960X-24PS-L Specification
WS-C2960X-24PS-L Specifications
|
| Enclosure type |
Rack-mountable - 1U |
| Ports |
48 x 10/100/1000 + 4 x 1G SFP |
| Network management Interface |
10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power |
370W |
| Forwarding bandwidth(Gbps) |
108Gbps |
| Maximum stacking number |
8 |
| Stack Bandwidth |
80 G |
| Forwarding Performance |
107.1Mpps |
| Switching bandwidth |
216Gbps |
| Maximum active VLANs |
1023 |
| MAC Address Table Size |
16K (default) |
| CPU |
APM86392 600MHz dual core |
| RAM |
256 MB |
| Flash Memory |
64 MB |
| Status Indicators |
Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed |
| Expansion / Connectivity |
| Console ports |
USB (Type-B), Ethernet (RJ-45) |
| Stacking cable |
Optional |
| Power Redundancy |
Option (PWR-RPS2300) |
| Voltage range (Auto) |
110V-240V |
| Power Consumption Operational |
0.49KVA |
| Miscellaneous |
| Width |
17.5 Inches (44.5 cm) |
| Depth |
14.5 Inches (36.8 cm) |
| Height |
1.75 Inches (4.5 cm) |
| Weight |
12.8 lb (5.8 Kg) |
| Package Weight |
23.48 lb (10.65 Kg) |
| Rack Mounting Kit |
optional |
| MTBF in hours |
324,280 |
| Compliant Standards |
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.1ax
|
| System software / license |
| System software |
IOS LAN BASE |
| license |
NERGY-MGT-100-K9, EW-DO-100-DE |
| features |
●Jumbo Frames
●VLANS
●Voice Vlan
●VTPv2
●CDPv2
●LLDP
●802.3ad LACP
●PVST/PVST+
●802.1W/802.1S
●Port Fast/Uplink Fast
●port CoS Trust and Override
●Scheduling
●Priority Queuing
●Configure CoS Priority Queues
●Weighted Tail Drop
●DSCP transparency
|
| Network security |
●SSH, SSL and SCP
●RADIUS and TACACS+
●SNMPv3 crypto
●802.1x
●802.1x Accounting / MIB
●802.1x w/ port security
●802.1x w/Voice VLAN
●802.1x Guest VLAN
●802.1x VLAN assignment
●802.1x MAC-Auth Bypass
●BPDU/Root Guard
●Port Security
●Private VALN Edge
●Storm Control
●Block unknown unicast and multicast
●IGMP Snooping
●IGMP Filter/Throttle
|
| Management and Troubleshooting |
●Auto-MDOX
●TDR
●UDLD
●IP SLA Responder
●layer 2 / IP Traceroute
●SPAN
●RSPAN
●Express Setup
●Device Manager
●Cisco Network Assistant
●Smartports + Advisor
●Troubleshooting Advisor
●Drag-and-drop Cisco IOS Upgrade
●IP Address DHCP
●Autoinstall with saved configuration
●Configuration Replace
●DHCP Auto Image Upgrade
●DHCP Port Based Allocation
●Error Disable MIB
|
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) |
23ºF to 113ºF
(-5ºC to 45ºC)
|
| Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF
(-5ºC to 40ºC)
|
| Short-term exception at sea level* |
23ºF to 131ºF
(-5ºC to 55ºC)
|
| Short-term exception up to 5000 feet (1500 m)* |
23ºF to 122ºF
(-5ºC to 50ºC)
|
| Short-term exception up to 10,000 feet (3000 m)* |
23ºF to 113ºF
(-5ºC to 45ºC)
|
| Short-term exception up to 13,000 feet (4000 m)* |
23º to 104ºF
(-5ºC to 40ºC)
|
| Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF
(-25º to 70ºC)
|
| Operating altitude |
Up to 10,000 Feet
(Up to 3000 Meters)
|
| Storage altitude |
Up to 13,000
(Up to 4000 Meters)
|
| Operating relative humidity |
10% to 95% noncondensing |
| Storage relative humidity |
10% to 95% noncondensing |
Cisco Catalyst 2960-XR Series available PoE and switch power capabilities with different combinations of power supplies
| Primary power supply |
Secondary power supply |
Available power for PoE+ |
Switch power redundancy |
Available PoE power when one PS fails |
| PWR-C2-250WAC |
– |
– |
No |
– |
| PWR-C2-250WAC |
PWR-C2-250WAC |
– |
Yes |
– |
| PWR-C2-640WAC |
– |
370W |
No |
– |
| PWR-C2-640WAC |
PWR-C2-640WAC |
370W |
Yes |
370W |
| PWR-C2-1025WAC |
– |
740W |
No |
– |
| PWR-C2-1025WAC |
PWR-C2-1025WAC |
740W |
Yes |
740W |
Software
All Cisco Catalyst 2960-X and 2960-XR Series Switches use a single universal Cisco IOS Software image for all SKUs. Depending on the switch model, the Cisco IOS image automatically configures the LAN Lite, LAN Base, or IP Lite feature set.
Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base, and LAN Base cannot be upgraded to IP Lite.
Your message must be between 20-3,000 characters!
