Place of Origin:
Beijing, China
Brand Name:
Cisco
Model Number:
WS-C3650-48TS-S
The Cisco® Catalyst® 3650 Series is the next generation of enterprise-class standalone and stackable access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform. The 3650 Series is built on the advanced Cisco StackWise®-160, and takes advantage of the new Cisco Unified Access™ Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The 3650 Series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE®) on the Cisco Catalyst 3650 Series multigigabit switches, and offer modular and field-replaceable redundant fans and power supplies. The 3650 Series switches also come in a 12-inch lower depth form factor so that you can deploy them in tight wiring closets in remote branches and offices where depth of the switch is a concern. In addition, the 3650 multigigabit switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure. The 3650 Series switches help increase wireless productivity and reduce TCO.
WS-C3650-48TS-S Specifications |
|
Switching capacity |
176 Gbps on 48-port models (non-multigigabit models) 92 Gbps on 24-port models (non-multigigabit models) 254 Gbps on 24-port Multigigabit models with 2x10G uplink 272 Gbps on 24-port Multigigabit models with 4x10G uplink 392 Gbps on 48-port Multigigabit models with 4x10G uplink 472 Gbps on 48-port Multigigabit models with 8x10G uplink 472 Gbps on 48-port Multigigabit models with 2x40G uplink |
Stacking bandwidth | 160 Gbps |
Total number of MAC addresses | 32,000 |
Total number of IPv4 routes (ARP plus learned routes) | 24,000 |
FNF entries |
48,000 flow on 48-port models 24,000 flows on 24-port models |
DRAM | 4 GB |
Flash | 2 GB (non-Multigigabit models) and 4GB (Multigigabit models) |
VLAN IDs | 4,094 |
Total switched virtual interfaces (SVIs) | 1,000 |
Jumbo frame | 9198 bytes |
Total routed ports per 3650 stack | 208 |
Number of access points per switch/stack | 25 |
Number of wireless clients per switch/stack | 1000 |
Total number of WLANs per switch | 64 |
Wireless bandwidth per switch |
Up to 40 Gbps on 48-port models Up to 20 Gbps on 24-port models |
Supported Aironet access point series | 3700, 3600, 3500, 2600, 1600, 1260, 1140, 1040 |
Forwarding Rate | 77.37 Mpps |
Dimensions (H x W x D) | 1.73 x 17.5 x 17.625 Inches |
Weight | 15.90 Pounds |
MTBF Hours | 527,580 |
Table 2. 1 and 10 Gigabit Fixed Uplink Configurations
|
Interface Options | |
Fixed Uplink Ports | 10 Gigabit Ethernet SFP+ Ports | Gigabit Ethernet SFP Ports |
4 x Gigabit Ethernet fixed uplink ports | 0 | 4 |
4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports | 2 | 0 |
0 | 4 | |
2 | 2 | |
4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports | 4 | 0 |
0 | 4 | |
2 | 2 | |
3 | 1 | |
1 | 3 | |
8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports | 8 | 0 |
0 | 8 | |
Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports |
Table 3. Switch Models and Corresponding Default Power Supplies
Models | Default Power Supply | Available PoE Power | Support Secondary Power Supply |
24-port data switch | PWR-C2-250WAC | - | Yes |
48-port data switch | Yes | ||
24-port PoE switch | PWR-C2-640WAC | 390 W | Yes |
48-port PoE switch | Yes | ||
48-port full PoE switch | PWR-C2-1025WAC | 775 W | Yes |
24-port mini PoE switch | Fixed 640 WAC | 390W | No, but supports RPS 2300 |
48-port mini PoE switch | Fixed 975 WAC | 775W | No, but supports RPS 2300 |
24-port Multigigabit PoE switch | PWR-C1-715WAC | 435 W | Yes |
24-port Multigigabit UPOE switch | PWR-C1-1100WAC | 820 W | Yes |
48-port Multigigabit full PoE switch | |||
48-port Multigigabit UPOE switch | 660 W | Yes |
Send your inquiry directly to us