Luogo di origine:
Pechino, Cina
Marca:
Cisco
Certificazione:
FCC
Model Number:
AIR-AP1832I-E-K9
AIR-AP1832I-E-K9 1830 Series outdoor wireless access point wifi AP
|
Part Number |
AIR-AP1832I-E-K9 |
|
Description |
802.11ac Wave 2 AP, 3x3:2, Internal Antenna, E Regulatory Domain |
|
Features |
- 3x3 MIMO with two spatial streams, single-user or multiuser MIMO - MRC - 802.11ac beamforming (transmit beamforming) - 20-, 40-, and 80-MHz channels - PHY data rates up to 867 Mbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
|
Regulatory Domain |
E (E regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 500 to 5.700 GHz; 8 channels |
|
Integrated antenna |
- 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° - 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
|
Interfaces |
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
|
Dimensions (W x L x H) |
8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
|
Weight |
3.12 lb (1.41 kg) |
AIR-AP1832I-E-K9 is one of the Cisco Aironet 1830 Series Access Points. Cisco 1830 AP series is ideal for small and medium-sized networks. This series supports the latest Wi-Fi standard, the 802.11ac Wave 2 standard. The 1830 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support. The model AIR-AP1832I-E-K9 provides E Regulatory Domain and internal antennas.
Table 1 shows the quick specs of AIR-AP1832I-E-K9.
| Part Number | AIR-AP1832I-E-K9 |
| Description | 802.11ac Wave 2 AP, 3x3:2, Internal Antenna, E Regulatory Domain |
| Features |
- 3x3 MIMO with two spatial streams, single-user or multiuser MIMO - MRC - 802.11ac beamforming (transmit beamforming) - 20-, 40-, and 80-MHz channels - PHY data rates up to 867 Mbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
| Regulatory Domain |
E (E regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 500 to 5.700 GHz; 8 channels |
| Integrated antenna |
- 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° - 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° |
| Interfaces |
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
| Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
| Weight | 3.12 lb (1.41 kg) |
Figure 1 shows the AIR-AP1832I LED Indicator Position.
Note: ① LED indicator position
Table 2 shows the AP LED indicators’ descriptions.
| Message Type | LED State | Message Meaning |
| Association status | Chirping Green | Normal operating condition, but no wireless client associated |
| Green | Normal operating condition, at least one wireless client association | |
| Boot loader status | Green | Executing boot loader |
| Boot loader error | Red | Boot loader signing verification failure |
| Access point regulatory domain priming status | Blinking Amber | AP priming to a new regulatory domain by Neighbor Discovery Protocol (NDP), in progress |
| Cycling Red, Green and off | AP waiting to be primed | |
| Chirping Red | AP primed to a wrong regulatory domain | |
| Operating status | Blinking amber | Software upgrade in progress |
| Cycling through green, red, and amber | Discovery/join process in progress | |
| Rapidly cycling through red, green, amber, and off. | Access point location command invoked from controller web interface. | |
| Access point operating system errors | Cycling through red, green, amber, and off | General warning; insufficient inline power |
Figure 2 shows AIR-AP1832I Ports and Connections.
Note:
| ① | Mode button | ④ | PoE-In port (Ethernet Uplink port) |
| ② | RJ-45 console port | ⑤ | 48 V DC input power port |
| ③ |
USB 2.0 port |
Video
Video
Video
Inviaci direttamente la tua richiesta.
