3850 Series 12-Port SFP IP Base Ethernet Managed Network Switch WS-C3850-12S-S
The Cisco Catalyst 3850 Series provides capabilities that ideally suited to support the convergence of wired
and wireless access. The new Cisco Unified Access Data Plane (UADP) Application-Specific Integrated
Circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility,
flexibility, and application optimization. This convergence is built on the resilience of the new and improved Cisco
StackWise-480 technology.
The Cisco Catalyst 3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco
Universal Power Over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ-45 and
fiber-based downlink interfaces, and redundant fans and power supplies.
WS-C3850-12S-S Specification
|
| Model info: |
WS-C3850-12S-S |
| Enclosure type |
Rack-mountable - 1U |
| Ports |
12 x SFP ports |
| Network management Interface |
Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling
Management console port: RJ-45-to-DB9 cable for PC connections |
| Available PoE Power |
None |
| Switching Capacity |
68Gbps |
| Maximum stacking number |
9 |
| Stack Bandwidth |
480Gbps |
| Forwarding Performance |
68.4Mpps |
| FNF entries |
48,000 flows |
| Maximum VLANs IDs |
1,000 |
| MAC Address Table Size |
32K |
| CPU |
Multicore CPU |
| RAM |
4 G |
| Flash Memory |
2 G |
| Wireless |
| Number of AP per switch/stack |
100 |
| Number of wireless clients per switch/stack |
2000 |
| Total number of WLANs per switch |
64 |
| Wireless bandwidth per switch |
up to 20Gbps |
| Supported Aironet AP series |
3600, 3500, 2600, 1600, 1260, 1140, 1040 |
| Expansion / Connectivity |
| Console ports |
USB (Type-B), Ethernet (RJ-45) |
| Expansion Slot(s) |
1 network module slot and 1 power redundant slot |
| Network Modules Selection |
C3850-NM-4-1G: 4 x 1G uplinks network module
C3850-NM-2-10G: 2 x 10G or 4 x 1G uplinks network module |
| Stacking cable |
STACK-T1-50CM StackWise stacking cable with a 0.5 m length
STACK-T1-1M StackWise stacking cable with a 1.0 m length
STACK-T1-3M StackWise stacking cable with a 3.0 m length |
| Stack Power Cable (recommended) |
CAB-SPWR-30CM stack power cable with a 30CM length
CAB-SPWR-150CM stack power cable with a 150CM length |
| Power supply |
PWR-C1-350WAC |
| Power Device |
Power supply - redundant - plug-in module |
| Power Redundancy |
optional |
| Voltage range (Auto) |
100V-240V |
| Power Consumption of standalone(in Watts) |
109.75 (Max) |
| Miscellaneous |
| Width |
17.5 Inches (44.5 cm) |
| Depth |
17.7 Inches (45.0 cm) |
| Height |
1.75 Inches (4.45 cm) |
| Weight |
15.48 Pounds (7.02 Kg) |
| Rack Mounting Kit |
optional |
| MTBF in hours |
315,840 |
Figure 1.
Cisco Catalyst 3850 Series Switches with 12 and 24 1 Gigabit Ethernet SFP ports
Figure 2.
Cisco Catalyst 3850 Series Switches with 10 Gigabit Ethernet 48 ports
The Cisco Catalyst 3850 Series Switches support dual redundant power supplies.The switch ships with one power
supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time.
If only one power supply is installed, it should always be in power supply bay 1. The switch also ships with three
field-replaceable fans. (See Figure 7.)
Dual redundant power supplies
Your message must be between 20-3,000 characters!
