WS-C3650-48TD-S Cisco brand 3650 Series 48 Port Data 2x10G Uplink IP Base Network Switch
● Integrated wireless controller capability with:
◦ Up to 40G of wireless capacity per switch (48-port models)
◦ Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)
● 24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports
● 24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE
● Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight
10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports
● 24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow
depth cabinets in enterprise, retail, and branch-office environments
● Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack
throughput
● Dual redundant, modular power supplies and three modular fans providing redundancy
● Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy
● Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor
● Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor
● IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6
● IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time
synchronization and quality of service (QoS)
● Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9,
and enhanced security features
● Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for
software features
● Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement
and 90-day access to Cisco Technical Assistance Center (TAC) support
| Product Code |
WS-C3650-48TD-S |
| Enclosure Type |
Rack-mountable - 1U |
| Feature Set |
LAN base |
| Uplink Interfaces |
2 x 10G SFP+ & 2 x 1G SFP |
| Ports |
48 x 10/100/1000 Ethernet ports |
| Maximum stacking number |
9 |
| Stack bandwidth |
160Gbps |
| Forwarding Performance |
104.16Mpps |
| Switching Capacity |
176Gbps |
| RAM |
4 GB |
| Flash Memory |
2 GB |
| Number of AP per switch/stack |
50 |
| Number of wireless clients per switch/stack |
1000 |
| Dimensions |
44.5 x 44.8 x 4.4 cm |
| Package Weight |
16 Kg |
Power over Ethernet Plus (PoE+)
The Cisco Catalyst 3650 Series Switches support both PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at standard),
which provide up to 30 W of power per port. PoE removes the need for wall power to each PoE-enabled device
and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone
and WLAN deployments. The 3650 Series can provide a lower TCO for deployments that incorporate Cisco IP phones,
Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant end device. Table 5 shows the
power supply combinations required for different PoE needs.
Minimum Power Supply Requirements for Full PoE and PoE+
|
|
24-Port PoE Switch |
48-Port PoE Switch |
PoE on All Ports
(15.4 W per port) |
One PWR-C2-640 WAC |
One PWR-C2-1025WAC or Two PWR-C2-640 WAC |
PoE+ on All Ports
(30 W per port) |
One PWR-C2-1025WAC or Two PWR-C2-640 WAC |
Two PWR-C2-1025 WAC |
Your message must be between 20-3,000 characters!
